# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21b (library isapnptools-1.21b)
# 
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of the output file format, see isapnp.conf(5)
# 
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
# 
# Compiler flags:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
# (for   library:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR)
# 
# Trying port address 0273
# Board 1 has serial identifier 81 ff ff ff ff 20 00 a8 65

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 81 ff ff ff ff 20 00 a8 65)
# Vendor Id YMH0020, No Serial Number (-1), checksum 0x81.
# Version 1.0, Vendor version 0.0
# ANSI string -->OPL3-SA3 Sound Board<--
#
# Logical device id YMH0021
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE YMH0020/-1 (LD 0

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0220
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
  (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0530
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
  (IO 1 (SIZE 8) (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
  (IO 2 (SIZE 8) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0330
#             Maximum IO base address 0x0330
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
  (IO 3 (SIZE 2) (BASE 0x0330))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0370
#             Maximum IO base address 0x0370
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
  (IO 4 (SIZE 2) (BASE 0x0370))
#       IRQ 5.
#             High true, edge sensitive interrupt
  (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 1.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
  (DMA 0 (CHANNEL 1))
#       Next DMA channel 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
  (DMA 1 (CHANNEL 3))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0240
#             Maximum IO base address 0x0240
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0240))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0e80
#             Maximum IO base address 0x0e80
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0e80))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 2 (SIZE 8) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0300
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 3 (SIZE 2) (BASE 0x0300))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 4 (SIZE 2) (BASE 0x0100))
#       IRQ 5.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 1))
#       Next DMA channel 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 1))

#       Start dependent functions: priority functional
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0f48
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x03f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 2 (SIZE 8) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0334
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 3 (SIZE 2) (BASE 0x0300))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 4 (SIZE 2) (BASE 0x0100))
#       IRQ 5.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 1))
#       Next DMA channel 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 1))

#     End dependent functions
 (NAME "YMH0020/-1[0]{OPL3-SA3 Sound Board}")
  (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)